BCLZW - BOSTIK 1127,ADHESIVE,PART A
- MSDS: BCLZW
- Manufacturer: BOSTIK DIV USM CORP EMHART INDUSTRIES INC
- Product Name: BOSTIK 1127,ADHESIVE,PART A
- National Stock Number: 8040-00N006129
Product Identification
Product ID:BOSTIK 1127,ADHESIVE,PART A
MSDS Date:01/01/1987
FSC:8040
NIIN:00N006129
Kit Part:Y
MSDS Number: BCLZW
Responsible Party
MIDDLETON, MA 01949
US
Cage: EO452
Contractor
Telephone: 508-777-0100
Cage: 70707
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 22%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ALIPHATIC HYDROCARBON BLEND
Fraction By Weight: 26%
ACGIH TLV: 500 PPM, MFR
ETHYL ACETATE (SARA III)
CAS: 141-78-6
RTECS: AH5425000
Fraction By Weight: 22%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 8%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:IRRIT OF EYES, NOSE, THROAT, HDCH. HEAVY
CONCENTRATIONS:DIZZ, FAILURE OF COORDINATION, NAUS, NARCOS.
First Aid
First Aid:SKIN:WIPE OFF IMMED. WASH W/SOAP & WATER. FLUSH W/WATER.
EYES:WASH OUT IMMED W/LRG VOLUME OF WATER AT LEAST 15 MINS. CALL
MD. INHAL:MOVE TO FRESH AIR. OBTAIN MD ASSISTANCE. GIVE ART RESP IF
NEEDED.
Fire Fighting
Flash Point:-5F,-21C SCC
Lower Limits:1.27
Upper Limits:12.0
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA.
Accidental Release
Spill Release Procedures:EXTINGUISH ALL SPARKS & FLAME. PROVIDE GOOD
VENT. AVOID BREATHING VAPORS. ALLOW SOLVENT TO EVAPORATE OR COVER
W/EXTINGUISHER FOAM. SCRAPE UP W/PLASTIC SCRAPER.
Handling
Handling and Storage Precautions:STORE IN COOL LOCATION (60-80F)AWAY
FROM SUNLIGHT,OTHER SOURCES OF HEAT, SPARKS, FLAME. KEEP CONTAINER
TIGHTLY CLOSED WHEN NOT IS USE.
Other Precautions:USE W/ADEQUATE VENT. AVOID SKIN CONTACT. AVOID
PROLONGED OR REPEATED BREATHING OF VAPORS. USE IN AN AREA FREE FROM
SPARKS & FLAME.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD SCBA IN AREAS OF POOR VENT.
Ventilation:LOCAL EXHAUST:PREFERRED. GENERAL MECHANICAL:ACCEPTABLE.
Protective Gloves:PLASTIC
Eye Protection:SFTY GLASSES/FACE SHIELD
Other Protective Equipment:SAFETY SHOWER & EYE BATH
Supplemental Safety and Health
BP:56-111C.VAP DENS & EVAP RATE ARE APPROX;MSDS,HARD
COPY,DATED:12/11/78;PER MFR 3/10/86,BOSTIK 1127 IS DELETED.THE
CURING AGENT(PART B) USE WITH THIS ITEM WAS BOSCODUR #25(SEE
8040001429913)
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:133-232F
Vapor Pres:74
Vapor Density:3.05
Spec Gravity:0.88
Evaporation Rate & Reference:3.2, ETHYL ETHER
Solubility in Water:SLIGHT
Appearance and Odor:BUFF COLORED LIQUID W/NON RESIDUAL ODOR.
Percent Volatiles by Volume:86
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:HEAT, SPARKS, FLAME
Hazardous Decomposition Products:CO, CO*2, HCL & OTHER TOXIC FUMES
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL,STATE 6 LOCAL
ANTI-POLLUTION REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.